Note: In my router, port 0 is the CPU port, and ports 1-4 correspond to the labeled ports 4-1 respectively (i.e. After getting rid of the rented modem we decided to upgrade our upload speed. In this case, we are using a CenturyLink modem/router combo and an Apple AirPort Extreme, but you can apply these concepts to most other DSL modems and home routers, just make sure it is a CenturyLink compatible modem. Damit Verizon Media und unsere Partner Ihre personenbezogenen Daten verarbeiten können, wählen Sie bitte 'Ich stimme zu.' Open the device’s settings tab or app and select the network or internet setting (for instance, on a PlayStation 4, you should go to the network tab. All in all I’m glad we switched away from Comcast, and having fiber directly connected to our house is pretty cool. Either way, adding the following lines to /etc/rc.local finally got the switch to match its intended configuration: Once I figure out why OpenWRT isn’t correctly respecting /etc/config/network, I’ll update this post. On an iPhone, go to the Wi-Fi tab on the settings app). I am currently wanting to buy my own router/modem to avoid rental fee from century link. CenturyLink is a telecommunications company within the United States, and it is a popular choice for many individuals that need a digital subscriber line. ATTENTION: If you have configured the modem as Transparent Bridging mode, please refer to Step 3 and Step 4 in Topology 2. Log in to the web interface of TP-Link wireless router by referring to, ATTENTION: If you have configured the modem as Transparent Bridging mode, please refer to, Step 3: Log in to the web interface of TP-Link wireless router by referring to, Get to know more details of each function and configuration please go to, TP-Link takes your privacy seriously. Note: If the issue persists, we recommend to contact CenturyLink for more details. How to configure VLAN ID for your internet connection on wireless router (For new logo). You can boost your CenturyLink Wi-Fi signal by switching to a wireless modem that uses 802.11ac, like the Actiontec 3000A. Two boxes that are each dedicated to doing their own job. Step 2: Remove the CenturyLink modem, plug the Ethernet cable from ONT in the WAN port of your TP-Link wireless router instead. Topology 1: ONT (Ethernet cable) --- CenturyLink Modem--- TP-Link Router. You should see the network with your modem’s SSID number in the list. Sie können Ihre Einstellungen jederzeit ändern. If it is set to something else you will run into issues. They all say that they can send me a new modem but they have no control over what model I receive. Last edited 2/18/19 . You can pay $5 per month to lease a CenturyLink router, or buy your own. Please turn it on for the best experience. Step 3: Log in to the web interface of TP-Link wireless router by referring to How to log in to the web-based interface of Wi-Fi Routers (new logo). You can also connect a third-party router to your CenturyLink modem. Your CenturyLink rental could include a separate modem and router, or it could include a single device that connects to the internet and broadcasts a wireless network simultaneously. Step 1: Call CenturyLink for your PPPoE credentials. Modems modulate the internet signal between the wider net and your home’s network, so without one, you can’t connect to the internet. Purchase or lease a modem or router from CenturyLink to ensure you get a compatible model, Get a combined modem/router device to streamline your equipment, Enjoy a fast, steady in-home wireless network from CenturyLink. VLAN tagging over the WAN port, since the ONT expects all packets between it and the router to be tagged with VLAN ID 201, Lines 31-34: ensure switching and VLANs are enabled on your device, Lines 36-39: create a VLAN with ID 1, containing the CPU port (tagged) and LAN ports 1, 2, and 3 (untagged), Lines 41-44: create a VLAN with ID 201, containing the CPU port (tagged) and the LAN port 4 (tagged) – as mentioned above, on my router, LAN port 4 in the software corresponds to LAN port 1 on the hardware. You can ignore the lines containing orig and any other cruft. When you sign up for CenturyLink’s fiber internet service (FTTH), they’ll install an optical network terminal (ONT) somewhere in your house that converts the fiber optical into an Ethernet cable. The network is. PPPoE seems to be supported on most modern router but VLAN tagging seems to be very rare. First I edited the WAN interface’s settings to use the PPPoE credentials I harvested from the ZyXEL device, and then I went to configure the VLAN tagging. all the LAN ports are in reverse order). In this case, we are using a CenturyLink modem/router combo and an Apple AirPort Extreme, but you can apply these concepts to most other DSL modems and home routers, just make sure it is a CenturyLink compatible modem. OP here with an update: I bought a C2100T from ebay and swapped it out as my modem. The stuff you need to change is this: We want to always tag port 0, since the CPU should see traffic from separate VLANs as separate pseudo-interfaces (eth0.1 and eth0.201). The network is GPON (a type of passive optical network). Now we have the TP-Link TL-WR841N connected directly to the ONT, and we no longer have to rent the ZyXEL C1100Z router from CenturyLink. Step 1. Is it possible to do the same with your fiber set up? Your modem’s setup may differ depending on its age, make, and model, so always read your device’s instruction manual thoroughly when setting up your modem or modem/router combination. The C2100T cost me an extra $50, but I got the wireless speeds that I wanted, and when gigabit is available in my area I'll be able to take better advantage of those speeds with my wireless devices. Step 2. This is likely valuable to CenturyLink since they charge $9.99/mo for the rental of a “modem.”. I see things like ADSL2+ and I'm not sure what I need. My housemates and I are all college students and we don’t like getting ripped off, so I wanted to see if we could use nothing but our existing hardware. One think I'm trying to figure out is which modem/router I want to use with them. Details. What feature does the modem need to have in order to be compatible? Does anybody know if I'd be able to connect the cables into my D LINK router for a better connection, or do I HAVE to use this crappy centurylink one? All Rights Reserved. CenturyLink recently started offering FTTP-based Internet connections in our part of Seattle. Additionally, we are on a 40/5 connection, but were advertised upload speeds up to 20 megabits/s for a little extra per month. That said, it feels that CenturyLink has been pretty deceptive. Whether you are renting a modem from CenturyLink or have your own, you need both devices to get your wireless Internet to function most effectively. For Fiber services, you may also need to enable VLAN tagging (201). I’m currently trying to figure out if swconfig is actually broken (so I can submit a pull request), or if it’s just user error on my part. Your router has to use PPPoE to connect to the ONT. But nothing is too simple, this is still CenturyLink, so there are two problems: The requirement for VLAN tagging seems to come from the ONT vendor (Calix? From what I can tell, this is something they used to do, but no longer offer. Now, devices called routers connect to the modem and broadcast a Wi-Fi signal throughout your home so you can get online anywhere, anytime. I’m not sure if CenturyLink plans to upgrade the infrastructure in our neighborhood any time soon, but the reps I talked to weren’t able to give me any information, despite being shown the option to get 20 megabits/s upload during the signup process. Each has one or more CenturyLink-compatible models with multiple ports. I was a little confused when I got to configuring the switch, since my default configuration didn’t seem to match what most other people were seeing in OpenWRT’s web interface. How can I boost my CenturyLink Wi-Fi signal? What I later found out is that the TL-WR841N does support VLAN tagging, but only on the 4 LAN ports; the WAN port is connected directly to eth1 – no switch. I found this post detailing a couple ways to get that information. You may have the following two topologies when configuring your TP-Link wireless router with CenturyLink’s fiber service. It only real world downloads at 20MB/s. Security and summer camp (but not at the same time). This was promptly solved by flashing OpenWrt which (mostly) supports VLAN and setting VLAN to 201. Additionally I can't find it for sale online anywhere. Fiber comes to an ONT box that they usually attach to the side of your house (although I have an internal one because I got the fiber ran into my basement). To connect your own hardware to the CenturyLink ONT, your router needs to support two things: Getting our PPPoE credentials was the easy part. Also OpenWrt Also make sure your MTU setting is 1492. Some digging revealed that although it’s not particularly well-documented, you are free to use any port as the WAN port with OpenWRT. Modems compatible with CenturyLink include brands like 2Wire, Actiontec, Cisco, XyZEL, and Westell. If you have a newer DSL modem/router combo that you ordered directly from CenturyLink, your CenturyLink modem setup will likely correspond to the following instructions: Once you’ve connected your computer to the modem and activated the internet, you can connect additional web-enabled devices. I would like to be kept up to date with TP-Link news, product updates and promotions. Internet Service Partners is an authorized sales agent of CenturyLink. This means that you can use third party routers with your CenturyLink fiber service as long as they support VLAN tagging. Thanks, but no thanks.